Open Source CAD Files
Here are a variety of free, open-source computer aided design files that can be used to design your own 3D-printed end effectors for the Choitek Megamark. Files are provided in STL files in addition to parametric STP files.
Here are a variety of free, open-source computer aided design files that can be used to design your own 3D-printed end effectors for the Choitek Megamark. Files are provided in STL files in addition to parametric STP files.
|
|
Standard Servo
Micro Servo 
| ||
|
|
Gripper Plate
New Gripper Plate
| ||
|
|
Sharp Sensor 10-80 cm
Sharp Sensor 20-150 cm
| ||
License
All downloadable files on this page are licensed under the Creative Commons Attribution-ShareAlike 4.0 International.
In short, this means you are free to:
Under the following terms:
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
All downloadable files on this page are licensed under the Creative Commons Attribution-ShareAlike 4.0 International.
In short, this means you are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Under the following terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
